Robot blades
BEOS 30× Worx Blade
Thirty hardened stainless blades at 0.9 mm with titanium carbide, for the five-brand platform the other sets here do not fit.
Five of the seven sets on this shelf name the same broad family of machines.
This one names five completely different brands.
That is the most important thing on this page. Robot blade mounts divide into
two families, and a blade for one does not fit the other. A buyer whose machine
is on the second list will find that almost every set on this shelf is wrong for
them, and almost no listing explains why.
Reading the brand lists is how you tell.
What the maker prints on its own page
The blades are stainless steel, hardened in an additional manufacturing step.
Combined with the titanium carbide coating and a blade thickness of 0.9 mm, the
maker states this gives an extremely durable and break-resistant blade.
The galvanised cross-head screws are stated to make fitting and removal easy at
a blade change, with an additional thread lock for security.
The blades are described as extra sharply ground for perfect cut edges without
damaging the grass, and the set contains thirty blades and screws.
0.9 mm
The thickest on this shelf. Two other listings state 0.75 mm and describe it as
the standard.
Thicker is stronger and thicker is heavier — a fifth more mass on each of three
to six blades, on a disc that spins fast. Whether that is an improvement or a
mismatch depends entirely on what the machine’s own blades are, and the answer
is on the old blade rather than in any listing.
It is also consistent with this being a different platform: another
manufacturer, another disc, another original specification.
Hardened and coated
Most sets here are stainless with a hard coating. This one states an additional
hardening step before the coating.
Neither is quantified in any listing on this shelf, and this page reports what
each maker names rather than ranking two unmeasured treatments against each
other.
The screws
Galvanised, cross-head, with a thread lock.
A blade screw is undone and redone in grass and grit every four to five weeks
and holds a pivoting blade onto a fast disc. Cross-head is easier to engage with
a wet screwdriver than a small hex; a thread lock is what stops vibration
backing it out.
Availability
Around 19 €, read at the German, French, Italian and Spanish Amazon stores on the day of the survey.
Beyond the euro zone, the British Amazon store prices it in its own currency, which the spread above sets aside.
Nothing came back from the American Amazon store at all; the buy button there runs a search rather than opening an empty page.
Taken from Keepa on the day this page was last revised; stock and prices move without notice.
Prices quoted in this text were read on 26 September 2026. The live price is at the top of the page.
