Flow is quoted at zero height, and the garden is not at zero height · review
An entry pump with a stainless shaft, brass thread connections, 3.5 bar and two G1" nipples supplied.
The bottom line The only pump here that comes with the fittings you need to connect it — two G1" double nipples in the box — and the only one naming brass thread connections and a stainless shaft. 600 W, 3 000 l/h, 3.5 bar, and a second filling opening so it can be primed without a funnel.
An entry-level model: a powerful, energy-saving garden pump allowing straightforward operation with a garden spray or a sprinkler. Robust and reliable, with long life thanks to a thermal protection switch, a stainless steel shaft and brass thread connections. With a pressure of up to 3.5 bar the pump can be used with longer hoses or with sprinklers such as the maker’s own oscillating model, which is not included. An additional filling opening lets the pump be filled easily without a funnel, and emptied as easily. The contents are the pump and two G1” double nipples for connecting fittings with female threads.
The title adds a flow of 3 000 l/h and 600 W.
The most useful line in this listing.
A garden pump’s ports are usually female. The quick coupling on your hose, the tap adapter, the suction hose fitting — very often female as well. Nothing connects to anything until there is a male-to-male nipple in between, and on every other pump on this shelf you supply it yourself.
Two of them, in the box, correctly sized. It is not a specification and it is the difference between using the pump on the day it arrives and not.
Brass thread connections do not strip. A plastic thread in a pump housing strips the second time a fitting is overtightened, and then the port is finished.
A stainless shaft does not corrode in a machine that holds water for months at a time.
Neither is a performance figure and both are why a pump is still working in its sixth season.
The pressure figure is stated without the flow at which it occurs, which is zero — the outlet closed. Every pump on this shelf quotes its maximum pressure that way and none of them says so.
3 000 l/h is the other end of the same curve, measured with nothing to lift. The pump does not do both at once.
The head in metres and the suction height. The second is the one that matters if you are pumping out of a cistern rather than a butt, and it is absent here.
From 81 € to 107 €, that being the spread across the German, French, Italian and Spanish Amazon stores on the day of the survey.
Beyond the euro zone, the British Amazon store prices it in its own currency, which the spread above sets aside.
Nothing came back from the American Amazon store at all; the buy button there runs a search rather than opening an empty page.
Taken from Keepa on the day this page was last revised; stock and prices move without notice.
Prices quoted in this text were read on 26 September 2026. The live price is at the top of the page.
| Flow rate | 3 000 l/h, at zero head as the convention requires |
|---|---|
| Head | Not published as a height — up to 3.5 bar of pressure is stated |
| Motor power | 600 W, with a thermal protection switch |
| Suction height | Not published |
| Connections | Brass threads; two G1" double nipples supplied |
| Material | Stainless steel shaft, brass thread connections |
| Weight | Not published |
| Amazon reference | B08MV3VW7S (one reference across 5 Amazon marketplaces) |
| EAN | 4078500056694 |
Because a pump has female ports and your hose fittings usually have female threads too, and nothing connects until you have a double-ended male nipple. Finding that out on a Saturday afternoon is how a pump stays in its box for a week.
Brass threads in a pump housing do not strip when a fitting is overtightened, and they survive being unscrewed and reconnected over years. Plastic inserts do neither. It is a small material choice with a long consequence.
The maker states the pump can be used with longer hoses or a named oscillating sprinkler at that pressure. What arrives at the sprinkler depends on hose bore, length and couplings; this page prints the pump figure and says what it is measured at.
A first pump for hose and sprinkler use, where getting it connected matters as much as the figures
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on September 26, 2026.
Specifications: manufacturer sheet and Amazon product page. Prices and availability: Keepa. No product on this site has been physically tested.
650 W, R1" male 33.3 mm ports, filling opening, drain screw
A 650 W pump with a well-placed filling opening, a drain screw and R1" male connections on 33.3 mm.
Best for: Straightforward garden watering, for a buyer who will find the hydraulic figures elsewhere
600 W, 3 200 l/h, 7 m suction, 1" female thread, drain plug
A 600 W jet pump at 3 200 l/h with a 7 m suction height, a Noryl impeller and a drain plug for the winter.
Best for: Watering from a butt or emptying a pond, where lift is short and the pump lives indoors in winter
1 200 W, 5 000 l/h, 50 m head, 8 m suction, 19 L stainless vessel
A 19-litre stainless vessel with an automatic pressure switch, 5 000 l/h and 50 m of head, on a stainless pump body.
Best for: A permanent rainwater or well supply where the water is drawn in short bursts through the day
