Flow is quoted at zero height, and the garden is not at zero height · review
A stainless-bodied 1300 W pump at 5 000 l/h and 50 m of head, with an inlet filter, rubber feet and a tool-free drain plug.
The bottom line The highest head on the plain-pump half of this shelf — 50 m — on a stainless housing, with the three features that keep a pump alive: an inlet filter, a mechanical seal and a tool-free drain plug against frost. Separate filling and draining openings, and rubber feet to keep the vibration down.
A powerful garden pump with a maintenance-free 1300 W motor. Maximum flow up to 5 000 l/h, head up to 50 m and suction height up to 7 m, stated as ideal for garden watering, groundwater extraction, drainage and circulating clean water. Overload protection guards against motor overheating and a tool-free drain plug protects against frost damage. A mechanical seal is stated for a long life and operating safety. Separate filling and draining openings allow easy starting and quick emptying, and a filter catches contaminants and protects the motor. A carry handle is fitted. The housing is stainless steel combined with thermoplastic, described as corrosion-resistant and durable, with rubber feet to reduce vibration and keep the operation quiet.
The filter. Water from a butt carries roof grit; water from a well carries sand. Both reach the impeller, which is the part that wears. This is the only listing on this shelf to mention an inlet filter.
The mechanical seal. The seal between the wet end and the motor is cooled by the water passing it, which is why running a pump dry destroys it in minutes. Naming the seal type is naming the component that fails.
The drain plug, tool-free. Stated specifically against frost. A tool-free one gets used; one that needs a spanner from the back of the shed does not.
The highest figure among the plain pumps here, and it is measured at zero flow — the outlet closed.
What a high head buys in practice is pressure in reserve while water is actually moving. A pump rated to 50 m still has useful pressure at the end of thirty metres of hose and up a slope, where a 35 m pump is running out.
Filling and draining are two different operations at two different times of year, and this is one of the few pumps to give each its own hole rather than making one serve both.
The thread. On a pump, that is the first thing a buyer needs — you cannot connect it without knowing whether the ports are parallel or tapered, and in what size.
Around 67 €, read at the German Amazon store on the day of the survey.
Listed and unsold: the British, French, Italian and Spanish Amazon catalogues hold the reference with nobody behind it.
Nothing came back from the American Amazon store at all; the buy button there runs a search rather than opening an empty page.
Taken from Keepa on the day this page was last revised; stock and prices move without notice.
Prices quoted in this text were read on 26 September 2026. The live price is at the top of the page.
| Flow rate | Up to 5 000 l/h, at zero head as the convention requires |
|---|---|
| Head | Up to 50 m, at zero flow |
| Motor power | 1300 W, maintenance-free, with overload protection |
| Suction height | Up to 7 m, as stated |
| Connections | Not published |
| Material | Stainless steel housing with thermoplastic elements, mechanical seal |
| Weight | Not published — rubber feet and a carry handle are stated |
| Amazon reference | B0G2BR96VD (one reference across 5 Amazon marketplaces) |
| EAN | 0747721091305 |
Because rainwater carries roof grit and a well carries sand, and both go straight to the impeller. A filter is the cheapest protection there is for the one part of a pump that wears, and only one listing on this shelf mentions having one.
The listing does not say. That is a practical gap: a pump is connected before it is used, and the buyer needs to know whether the ports are parallel or tapered and what size, before ordering fittings.
For corrosion, on a machine that holds water and sits outdoors, yes. It says nothing about the impeller, the seal or the motor, which are what actually fail — and this listing does name the seal.
Drawing from a rain butt or a shallow well where the water carries debris
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on September 26, 2026.
Specifications: manufacturer sheet and Amazon product page. Prices and availability: Keepa. No product on this site has been physically tested.
650 W, R1" male 33.3 mm ports, filling opening, drain screw
A 650 W pump with a well-placed filling opening, a drain screw and R1" male connections on 33.3 mm.
Best for: Straightforward garden watering, for a buyer who will find the hydraulic figures elsewhere
600 W, 3 000 l/h, 3.5 bar, stainless shaft, brass threads
An entry pump with a stainless shaft, brass thread connections, 3.5 bar and two G1" nipples supplied.
Best for: A first pump for hose and sprinkler use, where getting it connected matters as much as the figures
600 W, 3 200 l/h, 7 m suction, 1" female thread, drain plug
A 600 W jet pump at 3 200 l/h with a 7 m suction height, a Noryl impeller and a drain plug for the winter.
Best for: Watering from a butt or emptying a pond, where lift is short and the pump lives indoors in winter
